Technische Mechanik II
General Information about the Course

Course

TUCaN module number (BI): 13-E0-M002
TUCaN module number (G/UI): 13-E0-M019
Cycle: Every summer semester
Lecturer: Prof. Dr.-Ing. habil. Ralf Müller alternating with Prof. Dr.-Ing. Dominik Schillinger
Language: German

All information regarding the lecture and the exercise of the current semester can be found in the respective courses in moodle and TUCaN.

Please note, that the lecture is for all students of the programmes Civil Engineering (BI), Geodesy and Environmental Engineering (G/UI). Over the course of the semester, the course will split in two parts. One of them is made for students of the programme Civil Engineering, the other is for students of Geodesy and Environmental Engineering. This accompanied by a split of the lecture, of the presented exercise and the tutorials.

The contents of the lecture, the presented exercises and the tutorials will then differ. This is why there exist two courses in TUCaN and Moodle for every one of these. More information can be found in TUCaN and Moodle.

BI G/UI
TUCaN course number of the lecture: 13-E0-0007-vl 13-E0-0019-vl
TUCaN course number of the presented exercise: 13-E0-0008-ue 13-E0-0019-ue
TUCaN course number of the tutorial: 13-E0-0010-tt 13-E0-0019-tt

Contents (BI)

As this lecture is in German, the contents are only available in this language.

  • 10. Zug und Druck in Stäben (Wiederholung)
    • 10.1 Spannung
    • 10.2 Dehnung
    • 10.3 Stoffgesetz
    • 10.4 Einzelstab
    • 10.5 Statisch bestimmte und statisch unbestimmte Stabsysteme
  • 11. Spannungszustand
    • 11.1 Spannungsvektor und Spannungstensor
    • 11.2 Ebener Spannungszustand
    • 11.3 Gleichgewichtsbedingungen
  • 12. Verzerrungszustand, Elastizität
    • 12.1 Verzerrungen
    • 12.2 Elastizitätsgesetz
    • 12.3 Festigkeitshypothesen
  • 13. Balken
    • 13.1 Einführung
    • 13.2 Flächenträgheitsmoment
    • 13.3 Grundgleichungen der geraden Biegung
    • 13.4 Normalspannung
    • 13.5 Biegelinie
    • 13.6 Einfluss des Schubes
    • 13.7 Schiefe Biegung
    • 13.8 Biegung und Zug / Druck
  • 14. Torsion
    • 14.1 Einführung
    • 14.2 Kreiszylindrische Welle
    • 14.3 Dünnwandig geschlossene Profile
    • 14.4 Dünnwandig offene Profile
    • 14.5 Torsion und Biegung
  • 15. Arbeitsbegriff in der Elastostatik
    • 15.1 Einleitung
    • 15.2 Arbeitssatz / Formänderungsarbeit
    • 15.3 Prinzip der virtuellen Kräfte
    • 15.4 Einflusszahlen und Vertauschungssätze
    • 15.5 Anwendungen des Arbeitssatzes auf statisch unbestimmte Systeme
  • 16. Knickung
    • 16.1 Einleitung
    • 16.2 Euler-Stab
  • H1 Hydrostatik
    • H1.1 Einführung
    • H1.2 Druck auf eine ruhende Flüssigkeit
    • H1.3 Auftrieb
    • H1.4 Schwimmender Körper
    • H1.5 Druck auf ebene Flächen
    • H1.6 Druck auf gekrümmte Flächen

Contents (G/UI)

As this lecture is in German, the contents are only available in this language.

  • 10. Zug und Druck in Stäben (Wiederholung)
    • 10.1 Spannung
    • 10.2 Dehnung
    • 10.3 Stoffgesetz
    • 10.4 Einzelstab
    • 10.5 Statisch bestimmte und statisch unbestimmte Stabsysteme
  • 11. Spannungszustand
    • 11.1 Spannungsvektor und Spannungstensor
    • 11.2 Ebener Spannungszustand
    • 11.3 Gleichgewichtsbedingungen
  • 12. Verzerrungszustand, Elastizität
    • 12.1 Verzerrungen
    • 12.2 Elastizitätsgesetz
    • 12.3 Festigkeitshypothesen
  • 13. Balken
    • 13.1 Einführung
    • 13.2 Flächenträgheitsmoment
    • 13.3 Grundgleichungen der geraden Biegung
    • 13.4 Normalspannung
    • 13.5 Biegelinie
    • 13.6 Einfluss des Schubes
    • 13.7 Schiefe Biegung
    • 13.8 Biegung und Zug / Druck
  • 16. Kinematik des Punktes
    • 16.1 Geradlinige Bewegung
    • 16.2 Ebene Bewegung
    • 16.3 Räumliche Bewegung
  • 17. Kinetik des Massenpunktes
    • 17.1 Grundgesetze
    • 17.2 Freie Bewegung, Wurf
    • 17.3 Geführte Bewegung
    • 17.4 Widerstandskräfte
    • 17.5 Impulssatz, Stoß
    • 17.6 Momentensatz
    • 17.7 Arbeitssatz, potentielle Energie, Energiesatz
    • 17.8 Gravitationsgesetz, Planetenbewegung
  • 18. Kinetik eines Systems von Massenpunkten
    • 18.1 Grundlagen
    • 18.2 Schwerpunktsatz
    • 18.3 Momentensatz
    • 18.4 Arbeits- und Energiesatz
    • 18.5 Zentrischer Stoß
    • 18.6 Körper mit veränderlicher Masse
  • H2 Hydrodynamik
    • H2.1 Einführung
    • H2.2 Stromfadentheorie
    • H2.3 Kontinuitätsgleichung
    • H2.4 Bernoullische Gleichung
    • H2.5 Impulssatz

Literature

  • D. GROSS, W. HAUGER, J. SCHRÖDER und W.A. WALL: “Technische Mechanik, Band 2: Elastostatik”, Berlin, Springer-Verlag
  • D. GROSS, W. EHLERS, und W. WRIGGERS: “Formeln und Aufgaben zur Technischen Mechanik 2 : Elastostatik”, Berlin, Springer-Verlag
  • W. HAUGER, N. LIPPMANN, V. MANNL und E. WERNER: “Aufgaben zu Technische Mechanik 1-3 : Statik, Elastostatik, Kinetik”, Berlin, Springer-Verlag
  • I. SZABO: “Einführung in die Technische Mechanik : Nach Vorlesungen (Klassiker Der Technik)”, Berlin, Springer-Verlag

Remarks

Voluntary exercise in the lecture hall

Every attendant of the lecture can (voluntarily) participate in this excercise in the lecture hall. Examplary exercises and their solutions are therein presented by the teaching personnel.

Group exercise

The groups are supervised by tutors. There, problems which arose during doing the exercises are discussed.This requires that you have occupied yourself with the current exercise sheet beforehand.

The exercise sheet will be available for download the week before the group meeting through Moodle.

The registration happens through TUCaN.

The participation in the exercises is not obligatory, but strongly recommended.

Exam

There will be an written exam.

Time and place of the exam can be found in TUCaN. The seating will be announced in moodle.

Please bring your student ID and an additional valid photo ID to the exam.

Also take notice of the general information about exams .

The permitted resources are, if not specified otherwise:

  • the “Biegelinientafel”,
  • the “Koppeltabelle”,
  • the “Hilfsblatt zur Torsion” and
  • the “Hilfsblatt zu Flächenträgheitsmomenten”.

These resources can be found in moodle.

Exam inspection

The date of the exam inspection will be announced at the given time.

Please regard the hygiene conditions of TU Darmstadt.

For the inspection you need a valid photo ID. If you send a fellow student to do the inspection for you, a signed certificate of authority is needed. Please also regard the general information about exam inspections .

Previous exams

Please note that the contents of the lecture differ from the original lecture TM II for the programmes Geodesy and Environmental Engineering. Some parts of the lecture TM II are not relevant any more for these programmes, but parts of the lecture TM III instead. For this reason you can find previous exams for both these lectures in the following lists. Not all of the exercises are part of the current lecture.

Previous exams

Datei Typ Größe
tm2_SoSe17PDF-File342kB
tm2_SoSe19PDF-File282kB
tm2_SoSe21PDF-File276kB
tm2_SoSe22PDF-File362kB
tm2_SoSe23_BIPDF-File2116kB
tm2_SoSe23_GUIPDF-File1865kB
tm2_WiSe1718PDF-File276kB
tm2_WiSe1920PDF-File200kB
tm2_WiSe2122PDF-File307kB
tm2_WiSe2223_BIPDF-File353kB
tm2_WiSe2223_GUIPDF-File371kB

Short solutions

Datei Typ Größe
tm2_SoSe17_KLSGPDF-File842kB
tm2_SoSe19_KLSGPDF-File873kB
tm2_SoSe21_KLSGPDF-File835kB
tm2_SoSe22_KLSGPDF-File746kB
tm2_SoSe23_KLSGPDF-File950kB
tm2_WiSe1718_KLSGPDF-File755kB
tm2_WiSe1920_KLSGPDF-File856kB
tm2_WiSe2122_KLSGPDF-File850kB
tm2_WiSe2223_BI_KLSGPDF-File206kB
tm2_WiSe2223_GUI_KLSGPDF-File155kB

Really old previous exams without short solutions

Datei Typ Größe
tm2_SoSe02PDF-File109kB
tm2_SoSe03PDF-File125kB
tm2_WiSe0001PDF-File290kB
tm2_WiSe0102PDF-File103kB